DJI - EvoLite Kit for Phantom 4 Pro and Pro +
Currently, this kit can only be used with the ITE-DBS02.2 antenna which only works on 2.4 GHz. You must manually select 2.4 GHz in the DJI Go app for it to work. DO NOT USE this antenna when flying on Auto or 5.8 GHz mode! Around April 2017, we will have an antenna with both 2.4 and 5.8 GHz.
This kit DOES NOT include an Antenna. If you would like the ITELITE Antenna, you want the EvoLite Kit Plus or the EvoLite Kit Maxx.
This kit includes:
- 5000 mAh Battery (good for about 75 flights)
- Maxx UAV Custom Mount
- 2 Sunhans Amplifiers
- Two 22cm RG58 Z-Type Cables
- All cables needed
- All Hardware
NEW Optionally, you can add a pair of small 15 cm 8 dBi omnidirectional antennas which are similar to the small stock antennas. Use these if you don't want to carry your larger external Itelite antennas. These antennas are similar to the stock ones and support both 2.4 and 5.8 GHz (see last picture above)
When using the boosters/amplifiers, make sure to select 2.4 GHz and, optionally, select select a channel between 12 and 22. Channels lower than 12 and above 22 fall outside the boosters' operating range of 2400-2500 MHz. See this link for more information. Also, in custom channel mode, make sure to set the live transmission quality to the lowest setting (4 Mbps) for more distance or penetration; the recorded video won't be affected by this setting.
We recommend choosing the custom installation cables, so you can re-use the existing antenna holes. Without these cables, you will have to drill new holes on top of the remote control!
*Controller & Antenna are NOT included.
Don't want to risk doing the modification yourself? Choose the installation service & send it to us and we'll do the dirty work for you! The cost includes the labor and return shipping. You can choose to let us provide you with a return label and organize the pick-up of your controller - this is available in most European countries at a supplement as selectable above. Pick-up in some countries is more expensive or not possible; you will be informed after placing the order if this is the case.
Please note: make sure it is legal in your country to use amps. They have the CE sign/logo, but a license might be required, depending on your country. Make sure you are informed. The DJI remote controllers have moderate power, so even with these amps the legal limit may possibly not be exceeded. Your mileage may vary though.
We Also Recommend